Monte Carlo study and design of system for implementation of Rotational Total Skin Electron Irradiation technique

(2018) Monte Carlo study and design of system for implementation of Rotational Total Skin Electron Irradiation technique. Journal of Instrumentation. ISSN 1748-0221

Full text not available from this repository.

Official URL: WOS:000433388000002

Abstract

Total skin electron irradiation technique is used in treatment of the mycosis fungoid. The implementation of this technique requires non-standard measurements and complex dosimetry methods. Depending on the linear accelerator (Linac) type, bunker size, room dimensions and dosimetry equipment, the design of instruments for appropriate set up and implementation of TSEI in different radiation therapy centers varies. The studies which have been done in this article provide an introduction to the implementing of this method for the first time in Iran and its results can be used for the centers with similar specifications in the world. This article determined the electron beam characteristic of TSEI for the only electron accelerator, located at the radiation center of the Seyed Alshohada Hospital of Isfahan (NEPTUN 10PC), by performing Monte Carlo simulations and using EGSnrc-based codes (BEAMnrc and DOSXYZnrc). For the best uniformity of the vertical profile, the optimal angle of gantry was defined at SSD = 350 cm. The effect of the degrader plane that is located at a distance of 20 cm from the patient surface, was evaluated on the amount of energy reduction of the beam, the opening of the electron beam field and the homogeneity of the dose distribution. The transversal dose distribution from the whole treatment with Stanford technique (six dual fields) and Rotational technique was simulated in a CT-based anthropomorphic phantom. Also, the percentage depth dose in the head, neck, thorax, abdomen and legs was obtained for both methods. The simulation results show that the 20 degrees angle between the horizontal and the beam central axis is optimal in order to provide the best vertical dose uniformity. The mean energy decreases from 6.1 MeV (the exit window) to 3 MeV (the treatment surface) by placing a degrader with 0.8 cm thickness in front of the treatment plane. FWHM of the angular distribution of the electron beam increased from 15 degrees at SSD = 100 cm to more than 30 degrees on the treatment surface by traversing the PMMA degrader. The MC calculated percentage depth dose curves in different organs of anthropomorphic phantom for RTSEI indicates that the depth of maximum dose is on the surface of the phantom and Isodose curve of 80 is formed at a depth less than 4 mm. the results also show, with the degrader plane in front of the patient, the degree of homogeneity of the dose distribution for both Stanford and rotational techniques is the same.

Item Type: Article
Keywords: algorithms and software for radiotherapy instrumentation for gamma-electron therapy radiotherapy concepts dosimetry therapy beam simulation
Divisions: Cancer Prevention Research Center
Faculty of Medicine
Journal or Publication Title: Journal of Instrumentation
Journal Index: ISI
Volume: 13
Identification Number: Artn P05029 10.1088/1748-0221/13/05/P05029
ISSN: 1748-0221
Depositing User: Zahra Otroj
URI: http://eprints.mui.ac.ir/id/eprint/6469

Actions (login required)

View Item View Item